DAA Mr. Bulletfeeder Pre-Set Nose-Guide
In Stock
Save setup time and make calibre swap-overs easier than ever, with the Mr.Bulletfeeder Pre-Set Nose-Guide!
Those familiar with using the Mr. Bullet Feeder by DAA, will know how critical it is to adjust the Nose-Guide piece precisely correctly for the bullet calibre and profile you are collating. Positioning the Nose-Guide at precisely the correct depth under the collator bullet plate and setting the depth of the Nose-Guide pocket exactly right, are key to collating with 100% reliability and to feeling all bullets base down as required.
If you often switch between bullet types or calibres, it can be time consuming to have to readjust that nose guide each time.
Well – no more!
The Mr.Bulletfeeder Pre-Set Nose-Guide allows you to micro-adjustment the position of the Nose Guide and quickly achieve the perfect setting for your bullet type and calibre. And no more need for the loose Nose-Guide Spacers either, which so often got lost between calibre change overs. Now the depth of the pocket is adjusted with just a turn of a screw.
And better still! If you have multiple Pre-Set Nose-Guides, you can remove each one pre-set for a particular bullet – and drop it back in next time you need it! The part snaps into place against the magnetic stop-position piece (included) and you are perfectly setup and ready to load. This enables you to change bullet types in seconds, not minutes.
The bright coloured orange material is perfect for writing on with a black Sharpie, to mark the bullet type it is pre-set for.
Please note:
This Pre-Set Nose-Guide is a drop on fit to all the Mr.BF units produced from 2018 and later (the units which have the hanger that clamps onto the motor gear box). Earlier models – the ones which had the round aluminium rods and round Delrin puck hangers – will require some DIY fitting. You can still use this new part – but you will need to slightly widen the slot for the Nose-Guide in your Collator base before use and modify the shape of the magnet holder piece to fit next to the round mounting rod on the base plate.
Watch the tutorial video under the "Video/Docs" tab for installation instructions.
| SKU | 145475 |
| Brand | Double Alpha Academy |
| Shipping Weight | 0.0500kg |
| Shipping Width | 0.080m |
| Shipping Height | 0.040m |
| Shipping Length | 0.010m |
| Shipping Cubic | 0.000032000m3 |
| Unit Of Measure | ea |
Save setup time and make calibre swap-overs easier than ever, with the Mr.Bulletfeeder Pre-Set Nose-Guide!
Those familiar with using the Mr. Bullet Feeder by DAA, will know how critical it is to adjust the Nose-Guide piece precisely correctly for the bullet calibre and profile you are collating. Positioning the Nose-Guide at precisely the correct depth under the collator bullet plate and setting the depth of the Nose-Guide pocket exactly right, are key to collating with 100% reliability and to feeling all bullets base down as required.
If you often switch between bullet types or calibres, it can be time consuming to have to readjust that nose guide each time.
Well – no more!
The Mr.Bulletfeeder Pre-Set Nose-Guide allows you to micro-adjustment the position of the Nose Guide and quickly achieve the perfect setting for your bullet type and calibre. And no more need for the loose Nose-Guide Spacers either, which so often got lost between calibre change overs. Now the depth of the pocket is adjusted with just a turn of a screw.
And better still! If you have multiple Pre-Set Nose-Guides, you can remove each one pre-set for a particular bullet – and drop it back in next time you need it! The part snaps into place against the magnetic stop-position piece (included) and you are perfectly setup and ready to load. This enables you to change bullet types in seconds, not minutes.
The bright coloured orange material is perfect for writing on with a black Sharpie, to mark the bullet type it is pre-set for.
Please note:
This Pre-Set Nose-Guide is a drop on fit to all the Mr.BF units produced from 2018 and later (the units which have the hanger that clamps onto the motor gear box). Earlier models – the ones which had the round aluminium rods and round Delrin puck hangers – will require some DIY fitting. You can still use this new part – but you will need to slightly widen the slot for the Nose-Guide in your Collator base before use and modify the shape of the magnet holder piece to fit next to the round mounting rod on the base plate.
Watch the tutorial video under the "Video/Docs" tab for installation instructions.
| SKU | 145475 |
| Brand | Double Alpha Academy |
| Shipping Weight | 0.0500kg |
| Shipping Width | 0.080m |
| Shipping Height | 0.040m |
| Shipping Length | 0.010m |
| Shipping Cubic | 0.000032000m3 |
| Unit Of Measure | ea |
We value your opinion.
Leave a reviewWe value your opinion.
Leave a review
Copyright © 2024 David Bailey Enterprises Pty Ltd.
ABN: 19 161 552 736
Address: P.O. Box 8, Bridgewater. TAS 7030
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern David Bailey Enterprises Pty Ltd’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘David Bailey Enterprises Pty Ltd’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is . Our ABN is 19 161 552 736. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
This privacy policy sets out how we uses and protects any information that you give us when you use this website.
We are committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement.
We may change this policy from time to time by updating this page. You should check this page from time to time to ensure that you are happy with any changes.
What we collect
We may collect the following information:
What we do with the information we gather
We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:
Security
We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.
How we use cookies
A cookie is a small file which asks permission to be placed on your computer's hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.
We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system.
Overall, cookies help us provide you with a better website by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us.
You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.
Links to other websites
Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.
Controlling your personal information
You may choose to restrict the collection or use of your personal information in the following ways:
We will not sell, distribute or lease your personal information to third parties unless we have your permission or are required by law to do so. We may use your personal information to send you promotional information about third parties which we think you may find interesting if you tell us that you wish this to happen.
If you believe that any information we are holding on you is incorrect or incomplete, please write to or email us as soon as possible. We will promptly correct any information found to be incorrect.
